TED 5000 is installed! It's alive!

TED 5000 Home Energy Monitor Efficiency Smart Meter Grid

TED 5000 opened

In the future, when the smart grid is finally here, every home will have a smart meter. But the future is a long ways off, so there is no sense in waiting. Energy, Inc., the manufacturers of The Energy Detective and the TED 5000 announced on Tuesday, June 30th that the TED 5000 was ready to order. Well, my TED 5000 came by FedEx today and I had it installed and running in around an hour. While I have only had it a few hours, I am very impressed. While I have already covered the TED 5000 once in my post announcing its release date and some off its features, this will be an overview of some of the first things that have caught my attention.

The TED 5000 installs much the same way that the TED 1000 does. I really dont want to cover installation that much because if done wrong, it can be dangerous. While I'm not an electrician, I do have a decent amount of knowledge around electrical equipment, so I felt comfortable installing it. The biggest thing is to ensure the main breaker is turned off so no electricity is in the panel. But please don't take this blog post as installation instruction. There are good installation instructions, getting started guide, and instruction manual that comes with the unit, but if you aren't that comfortable around electrical equipment call an electrician. If the electrician is competent he will be done in under 30 minutes as it is not hard at all for someone who knows what they are doing.

Display Unit

I purchased the TED 5000-C, which is the model that comes with the Display Unit. You can purchase the TED 5000-G which does not come with a display unit and you would just access the data through your computer. I think the display unit is very cool, so I paid the extra $40 bucks and got it. The total amount I paid was $239.95 before taxes and shipping. When I opened the TED 5000 there were three smaller packages containing:

MTU - this comes with the current transformers (CTs) and wires and installs in your breaker panel. It sends data to the...
Gateway - This is plugged in an electrical outlet by your computer. It receives signals from the MTU over your home's wiring. It then sends data over an Ethernet cable to your router or directly to a computer. It can also send data wirelessly (ZigBee) to the ....
Display unit - This is an option but I highly recommend it. It plugs into the wall for power but gets its data from the Gateway over a wireless connection. It looks like a big silver Ipod video.

Aside from separating the Gateway and the Display unit, the biggest change with the TED 5000 is the Footprints Software. They have done an amazing job with this. Unlike the TED 1000, which sold the software as separate and came on a disc, the TED 5000 includes the software in the price, but the software is retrieved directly from the Gateway, meaning there is no installation necessary. You simply have to type "ted5000" in the internet address bar to access the software after the Gateway is connecting to your network. (see screen shot of software on my computer at the end of the post)

Initial configuration is all done through a set-up wizard. I did notice one error in the "Quick Start Guide" when setting up the software. The guide instructs you to start from the "Setup Menu", but they must have made a revision, because there is no "Setup Menu". You have to go to "Edit --> System Wizard Setting". From there it is very straightforward.

The guide highly recommends plugging the Ethernet cable that comes out of the Gateway into a router, and not directly into a computer. I would also recommend this because it makes things much simpler. The beauty of having the software reside on the Gateway is that as long as the Gateway is connected to your home router, you will be access the data from any computer on your home network! I had to do this because my laptop is wireless and I use a VPN to get on my work network. When I tried to access the TED 5000 software while on the VPN, I had trouble connecting. When I booted up the desktop, which is not wireless, I was able to access the software right away. This is the beauty of having the software reside on the Gateway and connecting the Gateway to the router!

Energy, Inc. has definitely beefed up the footprints software and it is much more intuitive and helpful. There are many, many features. The biggest of which is that you can EXPORT THE DATA! If you recall, this is why I returned my TED 1000 unit. The Gateway unit has internal memory that stores the data (up to 90 days of hourly data, 24 months of daily data, and 10 years of monthly data). The TED 1000 had no internal memory so it had no way to store and export the data unless you used your computer for that function. Since the Gateway has internal memory it can store data when your computer is off. This is great for seeing how your house uses energy while you sleep or when you are on vacation.

Exporting the data is vey simple and the data is exported in a .CSV format so you can easily view it in Excel.

Finally, another great feature is that the Footprints software has a widget that displays your local weather. All you have to do is tell it your zip code. Now, my only suggestion for Energy, Inc. is that they store the average temperatures and export those values with the energy data. This way, you can see how the local weather is affecting your energy consumption and track those changes over the season.

Overall, the TED 5000 has been greatly improved and is one of the best tools I can think of to get control over your electricity consumption. Much more to come in the following weeks!

***Update - 8/18/09 - The TED 5000 iPhone app has been released and is available in the app store. Check out my review here: TED 5000 iPhone app

***Update - 9/13/09 - See what kind of stuff you can do with the TED 5000 data once you have it installed in my latest blog on outside temperature impacts on energy consumption.

***Update - 10/07/09 - Several comments have noted you can't purchase the TED 5000 from Energy, Inc.'s website, but that has now changed and they do list them for sale and purchase online at the TED 5000 store. Click here to buy a TED 5000.

Footprints Screenshot

The below update is no longer viable since Google has shut down PowerMeter.

***Update 10/6/09 - Google has announced they are working with the TED 5000 as a device partner for their Google Power Meter software. Follow the link above to learn about it and to update your firmware. This is pretty big news and will no doubt send sales of the TED 5000 through the roof! I spoke with TED customer service and they said that if you already own a TED 5000, the Google Power Meter software update will be on their site on Friday, 10/9/09. If you don't already own a TED 5000 but buy a new one, the new unit will ship with the Google Power Meter software. I'm looking forward to seeing if the Google Power Meter software will have many advantages over their Footprints software!

Tags:

buy TED 5000

energy data

Footprints

google power meter

ted 5000 google power meter

TED 5000 review

ted 5000 software update

ZigBee

Comments

Anonymous (not verified) Sun, 08/23/2009 - 07:06

I got two new firmware updates from TED support (not on the website yet) and they fixed my no-history problem that I reported above on Aug 11. So far everything is working good again.

Anonymous (not verified) Sat, 09/12/2009 - 14:50

I just installed mine - I initially had communications problems between the gateway and MTU, but I moved the gateway around and eventually it all came to life. For no other reason, that's a reason that having the display unit is handy - I tried plugging in the gateway in places where an ethernet port wasn't handy, and the display suddenly came to life with real data. I wish there were something in there where the gateway could help you diagnose communications problems to the MTU. I piggybacked the MTU onto other breakers in the box, but I am not 100% comfortable with how that worked out as the breakers weren't really designed to have more than one wire shoved into them (esp wires of different sizes). I bought a dual-15A breaker this afternoon, and I will re-wire that part in a bit. In some ways installing the thing on a new breaker is probably easier - you attach the wires to the new breaker before you push the breaker into the box. In my case, attaching the CTs wasn't a big deal at all - the feed comes in from the bottom of the box, so they naturally slide away from the (still hot) terminals.

Anonymous (not verified) Sat, 09/12/2009 - 07:13

I wanted to find out if Loren got his AC profiling sorted out. I have the old TED and will order the 5000 but wanted to make sure I ordered correctly to track AC use either through the profiling capability, or by using a separate MTU for the compressor circuit. One thing I have learned with the old TED is that once you're done with the easy stuff in energy savings you have to focus down on climate control to get any sizeable efficiencies. For us in Texas, that's Air Conditioning. I want to install a geothermal system but I don't have really good AC data to do an ROI calculation. Any thoughts would be appreciated.

Anonymous (not verified) Wed, 09/16/2009 - 11:31

Hi Mark I installed my second MTU because profiling doesn't work that well with a DC furnace fan, as well as the simple nature of a Heat Pump. Due to the progressive increase in demand as the fan speeds up, the profile won't always catch the start-up. Another difficulty in profiling is that I live in the Pacific Northwest where the Heat Pump is used for both heating and cooling, with cooling requiring substantially less demand than heating. Cooling normally runs at about 1.6kWh, whereas heating on a 55 degree day may start out at 2.2kWh and progressively increase in demand based on the duration of run-time (eg. 35 minute run started at 2.2kWh and ended at 2.5kWh). The figures quoted above are for the Heat Pump isolated (does not include the furnace fan which is shown separately in my primary load "MTU1" - normally ramps up to about .5kWh). Now that I have the HP isolated I have set up a profile for the HP for MTU2 by setting the error factor at 50% and setting the load at 2.0kWh. This will profile the device from 1kWh to 3kWh. The only data that I receive from this is daily run-time, and not daily consumption. Consumption for the day is simply obtained by looking at the day graph. I also use a device similar to a Kill-A-Watt, but it is either faulty or won't work with a DC motor. On low speed the device indicates a total load of 72 to 77W less the thermostat of 12W, however, TED says that the low speed demand is 110W for the fan motor only. This would indicate a 33% error in the metering. When reading the meter at high speed, the indicated demand is 300W whereas TED says it should be just short of 500W (similar error factor). I am going to purchase a real Kill-A-Watt to verify this inaccuracy, unless someone suggests that these meters just simply don't work well with DC motors. Hope that makes sense. Loren

Anonymous (not verified) Sat, 09/12/2009 - 08:43

Mark, you're absolutely right that the AC has the biggest chance to make an impact at energy savings. I actually havent tried to isolate loads, but I think I'll work on that this weekend. I'll let you know what I find out.

Anonymous (not verified) Thu, 09/24/2009 - 18:20

Chris: I don't have a display unit ... we are talking about resetting the gateway. And, already tried unplugging several times.

Anonymous (not verified) Sun, 09/13/2009 - 14:20

I received my TED 5000-SC, and I ran into an installation challenge. It seems my breaker panel, which is a 200A 2-phase panel, has 4 wires coming from the meter side to feed 4 service disconnect breakers. So, what do I do? I can't clamp the CT over the two wires for each phases, because they alternate and aren't next to each other. If I put the CTs on only one pair of wires, then I'll only be measuring half of the current, right? I'm told that this panel is a fairly common one - they used four wires to use smaller gauge wire, and the space is very cramped - the wires come around behind all the breakers and make a tight U-turn, so there isn't really any way to move anything around. Plus, I have a solar generation system, so I need to use one of the MTUs for that, leaving only one MTU for the mains. Do I need to get another MTU? Do I need to exchange this for the 5002 which can support 3 or 4 MTUs, because I only see an option for 1 or 2 MTUs in the gateway setup wizard. I'll call them after the weekend, but wondering if anyone here knows. Thanks in advance!

Anonymous (not verified) Sat, 09/12/2009 - 15:57

I just received TED 5000 Equipment however I have some questions that needs little more explanation. First, I don't have any spare breakers all are in use. However, I found one is slot empty. The MTU has three wires: Red,Black and White (I know the white will go to neutral terminal block). Since I don't have any reserve breaker, What should I do with the Red and Black? I have one empty slot, should I buy a breaker there and use either red or black or can I use one of the occupied breakers? Please let me know your answers.

Anonymous (not verified) Mon, 10/05/2009 - 18:00

I spoke to the guys at Energy Inc and it seems the software isn't set up to do the math I am looking for. I did change a setting that shows me my actual net metering numbers but there is no way to show actual load while generating solar power. They said they will be offering some software updates soon that I may find useful. Tomorrow there is going to be an upgrade available on their website. We were also trying to figure out why I can't get my local weather on the dashboard. Hopefully, the update will help.

Anonymous (not verified) Sat, 10/10/2009 - 19:45

Jeff - I got my TED5000 this week and have set it up with my Solar system. I experience exactly the same problem you describe: no way to show actual load while generating. Shouldn't this just be a sign change (+ to -) in Footprints? Did TED tech support give you any solutions?

blog